3-way RC - DC regulator 2.5A with automatic switch-off

Function:
The 3-way controller contains three independent individual controllers. The following description applies to each individual controller.
The controller is used to control spindles and lifting cylinders with DC motors.

Operation is possible via a remote control stick or a 3-stage switch (forward/stop/backward).
If the motor is blocked, the controller is automatically switched off in a self-learning manner; no limit switches are necessary. It is insensitive to load changes. It also contains a self-learning runtime limit as an additional safety feature. The controller therefore adapts itself to the connected motor; nothing needs to be set - everything happens automatically.
The controller is also protected against overcurrent, short circuits and overheating. Acoustic signals indicate the current status.

Technical data:
Name: RC-DCCSO-2A5-3X
Operating voltage Ubattery: 4.5...17 V
Operating voltage UEcceptor: 4.5...13 V
Max. permissible continuous current: 3 x 2.5 A
Quiet current (from receiver): <30 mA
Motor/battery connection cable: 15cm, 0.25mm2 /20cm, 0.5mm2
RC cable: 30 cm
Max. driving time (max. speed): ˜120s
Self-learning stop position: no
Motor brake (in stop position): yes
Blocking protection: yes
Short circuit protection: yes 
Voltage monitoring: no
Battery reverse polarity protection: no
Overtemperature protection: yes
BEC: no
Size (without cable): 17 x 17 x 14 mm