Zurück
Weiter
Pinion slewing ring with 11 teeths and set screw Volvo EC160E
CHF13.95
CHF12.56
10% sparen
Pinion slewing ring with 11 teeth (original 10) for the Double E Hobby RC excavator EC160E scale 1:14
With this pinion the lateral play in the turntable can be minimized, the slewing ring upgrade is required.
The gear is provided with an internal thread M3. The grub screw provided can be used to create a force-fit connection between the gear wheel and the shaft.
Description
Small adjustments are necessary so that the pinion does not touch the housing. In addition, the backlash must be checked and the mounting holes of the geared motor may need to be adjusted a little if the pinion jams.
You might also like
Product of same Manufacturer
Vorschau
2 pcs ball bearing sprocket Volvo EC160E
CHF9.95
CHF8.96
Vorschau
2 pieces compression spring for chain tension
CHF14.95
Vorschau
Ad Blue Tank cap Scania Scale
CHF6.95
Vorschau
Adapter cable for rotating light & headlight Huina 580
CHF38.00
CHF34.20
Vorschau
Adblue tank cap scale
CHF4.95
Vorschau
Barrier 5m 1:14 (35,7cm) with ground anchor
CHF6.95
Vorschau
Barrier 5m 1:14 (35,7cm) with ground anchor (without advertising)
CHF11.95
Vorschau
Barrier 5m 1:14 (35.7cm) with batten holder for "Bruder" feet
CHF6.95